Stencil Materials Guide

Stencil Materials Guide

Type 1: Repositionable Adhesive-Backed 8.5 mil.
Type 2: Standard 10 mil.
Type 3: Clear-Clut 7 mil. Mylar

 

Type 1: Repositionable Adhesive-Backed 8.5 mil.
Name: Ultra-Cut II
Description: Ultra-Cut II is 8.5 mil (0.0085") clay-coated polyethylene with removable/repositionable adhesive on a heavy natural Kraft backing. Non-memory, easy forming slightly rigit with a surface coated to receive ink or paint and rapidly surface dry. Re-usable hundreds of times. Clay white surface with natural craft backing can withstand up to 180 degrees F. Conforms easily over curved surfaces. Use Inks or Paints, superior detail and crisp clean marking.

Bottom Line: This type of material acts like a giant Post-It Note! This material is especially good if you need to get a good crisp edge. Especially Great for T-Shirts!

Sample Stencil Images Below:

 

Type 2: Standard 10 mil.
Name: SSB-Cut
Description: SSB-Cut is a 10 mil (0.010") polyethylene which is adhesive free. Makes a strong non-adhesive Stencil which can be cleaned and stored easily. For use with most inks, Paints and stains. Non-memory for easily conforming to curves, heavy-weight for easy attachment to frames.

Sample Stencil Images Below:

 

Type 3: Clear-Cut 7 mil. Mylar
Name: Clear-Cut 7B
Description: Clear-Cut 7B is a Mylar type 7 mil. (0.007") polyester which is adhesive free. Makes a strong, Clear non-adhesive stencil which can be cleaned and stored easily. Solvent resistant for easy cleaning with almost unlimited shelf life.

Sample Stencil Images Below:

 

 

Back Home